Werbung
Verfügbare Sprachen
Verfügbare Sprachen
10.18
Alarm menu
The indicated data is only indicative
10.18.1
General alarm
GENERAL
BATTERY
ENTER
LINE BLACKOUT
LINE LACK
RS485 COMM. LACK
24V OVERLOAD
ENTER
LINE BLACKOUT
TOTAL:
STATUS:
COUNTER:
ENTER
LINE BLACKOUT
TOTAL:
STATUS:
-----
COUNTER:
STOP
-----
ENTER
LINE BLACKOUT
TOTAL:
STATUS:
------
COUNTER:
RESET
------
ENTER
98
ESC
ESC
0
----
RUN
----
ESC
0
ESC
0
ESC
LINE BLACKOUT: Shows the number of blackouts
detected in the mains voltage.
STATUS:
ON: (if no mains power)
OFF: (if there is mains power)
LINE LACK: Shows the voltage surges (gaps) detected.
STATUS:
ON: (voltage hole detected in the last 60 seconds)
OFF: (regular mains voltage)
RS485 COMM. LACK: Displays the number of
communication losses
STATUS:
ON: RS485 communication absent in at least one of the
two motors
OFF:
24V OVERLOAD: Number of overloads detected on
the external loads (photocells, etc.) 24 V power supply
output.
STATUS:
ON: current demand too high, safety device tripped
OFF: current drawn within limits
To see/modify the other functions, move onto the one
required (using the
same procedure.
STOP: interrupts the count
RESET: resets the count, keeping it at zero
To reset, press the ESC key, returning to the previous
menu.
Use the - key to go back in the sequence RESET > STOP
> RUN
RECOMMENDED SETTING: RUN (the count is functional)
Return to the previous menu
and
keys) and repeat the
Werbung
