Werbung
Verfügbare Sprachen
Verfügbare Sprachen
10.6
Control menu
The indicated data is only indicative
F70/IPU36
ENTER
x5 click
POWER
IPU 28.9°C
M1: 30.4°C
M2: 31.3°C
ENTER
+
POWER
IPU 28.9°C
M1: 30.4°C
ENTER
EXT
POWER
IPU 28.9°C
M1: 30.4°C
M2: 31.3°C
ENTER
+
POWER
IPU 28.9°C
M1: 30.4°C
ENTER
R1.50
ESC
FR:50.0HZ
VL:24.5V
ESC
VB:25.3V
VL:25.3V
M2: 0.°C
ESC
VB:37.0V
VL:24.7V
ESC
In case of battery operation with a battery that is too low, when the
VB:25.3V
motors are running a high current consumption is detected and the
VL:25.3V
symbol
operation for maximum 10 seconds. If the situation persists, the battery
will be disconnected.
M2: 0.°C
The control unit will return to operation with mains voltage or 36 V battery
voltage.
ESC
If the battery voltage drops below the critical level (attainable if par.
is set to
and the control unit no longer accepts any controls until the battery
voltage rises to 36 V.
FR= mains frequency
VL= voltage supplied to +24 V output. If the overload
unit (F70/IPU36) and the inverters (M1, M2).
This icon is displayed when battery charging is
charged B71/BCIPU is enabled and the battery is
connected to terminals 3-4.
activity is in progress; the icon disappear if the battery is
disconnected.
Battery operation (charging) if a battery is connected to
terminals 3,4 of F70/IPU36 with battery charger enabled.
LO
Battery low
(under the threshold set at par.
power supply terminals 1,2, instead of transformer
secondary).
EXT
External battery low
(under the threshold set at par.
, so no battery saving management), symbol
)
)
is displayed
83
Werbung
