Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Enable B73/RGB connected to MOTOR 1
X
Enable B73/RGB connected to MOTOR 2
X
Disabled.
Enabled with signalling function RGB (RED - GREEN - BLUE).
Select RG beacon operating mode
X
Disabled.
"Type A"..."type F" mode.
Select RGB signalling operating mode
X
Disabled
"Type A"..."type H" mode.
Enabling incoming colour transition at full aperture
X
percentage is reached, the colour transitions to the selected colour.
Disabled, the colour remains as per par. X /X .
Transition to orange colour when MOTOR 1 reaches 70-75-80-85-90% of its travel.
Transition to green colour when MOTOR 1 reaches 70-75-80-85-90% of its travel.
Select RGB colour in stand-by
X
par. X6 has elapsed.
Sequence of the various colours, with dimmed brightness.
Select the RGB lights stand-by time (when fully closed)
X
Stand-by disabled, the colour remains as selected in par. X (or X ).
Stand-by time 30", 60", 90", 2 minutes, .... 10 minutes.
B73/KEYS keyboard enabling
X
NOTE
Disabled
Setting the approach space of MOTOR 1 in OPENING
Y
Setting the approach space of MOTOR 2 in OPENING
Y
from min. to max.
Setting the approach space of MOTOR 1 in CLOSING
Y
Setting the approach space of MOTOR 2 in CLOSING
Y
from min. to max.
112
, only for modes type 'A', 'B', 'F', 'G' of RGB lights, when the indicated aperture
revolutions which the motor makes at the minimum speed set according to par.
revolutions which the motor makes at the minimum speed set according to par.
or
.
or
.
Werbung
