Werbung
Wiedergabe
Bei Wiedergabe fiihrt man das Chromasignal
Uber S 4-4 und CT 2505 der Chroma-Noise-
Reduction zu. Diese besteht aus VL 2508, VL
2510, CT 2515, CT 2530, CT 2535, CT 2545,
L 2508, L 2512 und L 2537. Uber CT 2550 ist
diese Stufe ein- bzw. ausschaltbar. Die Steu-
erung erfolgt durch IC 2305-(5). Nachdem das
Chromasignal
diese Stufe durchlaufen hat,
gelangt es von CT 2550 tiber CT 2555, CT
2560 und S 4-3 zuriick zum Chromabaustein.
PC 74 HC4053 (CIC 2380)
VCC
Playback
On Playback, the Chroma signal is fed to the
Chroma Noise Reduction circuit from S 4-4
and CT 2505. This consists of VL 2508, VL
2510, CT 2515, CT 2530, CT 2535, CT 2545,
L 2508, L 2512 and L 2537. From CT 2550 this
stage can be switched on or off. The control is
from IC 2305-(5). After the Chroma signal has
passed through this stage, it is fed from CT
2550 and through CT 2555 and CT 2560 to be
returned via S 4-3 to the Chroma module.
MSM 6967 (CIC 2470)
Riproduzione
In riproduzione si conduce il segnale croma al
circuito Noise-Reduction croma mediante S 4-
4e CT 2505. Esso é costituito da VL 2508, VL
2510, CT 2515, CT 2530, CT 2535, CT 2545,
L 2508, L 2512 e L 2537. CT 2550 hail compito
di accendere
e spegnere questo stadio. I
pilotaggio avviene tramite IC 2305-(5). Dopo
questo stadio, il segnale croma ritorna da CT
2550 al modulo croma attraverso CT 2555, CT
2560 e S 4-3.
CLK
BA 7021 (IC 2430)
BA 7021
IN|
CTL
IN
CTL
GND
COMP
VOB
VOD
vss
vCo
IN|
MUTE OUT
Vcc
83
Werbung
