V70, Input Isolating Amplifier Input: 0 Ma To 20 Ma - Siemens SINAMICS DCM Betriebsanleitung

Figure 11-13 Cable routing (1)
11.5.7

V70, input isolating amplifier input: 0 mA to 20 mA

Category
Supplementary circuits
Function
To connect an external analog setpoint, a DC isolating amplifier with galvanic isolation and
three-way separation is used.
Input: 0 mA to 20 mA
Output: 0 V to 10 V, which is wired to terminals -X71:25 :26
SINAMICS DCM Cabinet
Operating Instructions, 04/2015, A5E36161239/RS-AA/001
Options
11.5 Supplementary circuits
233