Installation; Lifting The Cabinet Off The Transport Pallet - Siemens SINAMICS DCM Betriebsanleitung

3.3.3

Installation

3.3.3.1

Lifting the cabinet off the transport pallet

The applicable local guidelines regarding the transportation of the cabinet from the transport
palette to the installation location must be observed.
With option M90, crane transport aids (eyes) are fitted on the top of the cabinet, and
transport irons are fitted for heavy cabinets.
The fixing screws of the transport pallets can be removed without having to lift the cabinet.
The positions of the fixing screws are indicated by red markings on the outside of the
cabinets.
Figure 3-7
For cabinets without base (in the figure on the left), the fixing screws of the transport pallets
must be removed from the underside of the pallet.
For cabinets with base (in the figure on the right), the fixing screws of the transport pallet are
accessible only after the cover is opened. They can then be loosened and removed directly
from the front.
The weight specified on the packaging and the designated center of gravity must always be
taken into account when the cabinet is lifted and transported!
Particular attention must be paid to this potential danger once you have unscrewed the
cabinets from the transport pallet!
SINAMICS DCM Cabinet
Operating Instructions, 04/2015, A5E36161239/RS-AA/001
Lifting from the transport pallet (left: without base; right: with base)
WARNING
Mechanical installation
3.3 Mounting
45