G11, Advanced Cud Right - Siemens SINAMICS DCM Betriebsanleitung

11.1.3

G11, Advanced CUD right

Category
SINAMICS DCM DC Converter
Function
Advanced CUD in the right-hand slot (precondition, option G00).
With option G11, users can address the highest demands regarding the closed-loop control
performance and use the wide range of interfaces. With this option, in addition to the
Advanced CUD located in the lefthand slot, an additional Advanced CUD can be installed in
the right-hand slot. This therefore doubles the number of interfaces of the SINAMICS DCM
DC converter.
Connection
The connections of the Advanced CUD installed at the right are routed to a TMC terminal
module. This terminal module has the designation -X72 and is suitable as customer
connection.
See the description of the terminal module TMC.
Parameter assignment
See the List Manual SINAMICS DCM.
Diagnostics
See the SINAMICS DCM DC Converter operating instructions
Cable routing
The cables are routed into the cabinet corresponding to the following diagrams.
SINAMICS DCM Cabinet
Operating Instructions, 04/2015, A5E36161239/RS-AA/001
11.1 SINAMICS DCM DC Converter
Options
193