Installation - Siemens SINAMICS DCM Betriebsanleitung

Original roof screws
Figure 3-10
After removing the crane transport aids, the removed transport eyebolts and/or the fixing
screws of the mounting rail must be replaced with the original roof fastening screws (Rittal
4198.000) to ensure compliance with the degree of protection and proper grounding of the
cabinet.
Figure 3-11
3.3.3.3

Installation

Four holes for M12 screws are provided on each cabinet panel to secure the cabinet to the
ground. The fixing dimensions are specified on the dimension drawings enclosed.
SINAMICS DCM Cabinet
Operating Instructions, 04/2015, A5E36161239/RS-AA/001
Original roof screws, accessory kit
Delivery state (left), original roof screws (right)
Mechanical installation
3.3 Mounting
47