G62, Customer Terminal Block Extension Using A Terminal Module Tm15 - Siemens SINAMICS DCM Betriebsanleitung

Options
11.8 Supplementary modules
11.8.3

G62, customer terminal block extension using a Terminal Module TM15

Category
Supplementary modules
Function
The following are located on the TM15 Terminal Module: 24 bidirectional digital
inputs/outputs (potential isolation in 3 groups, each with 8 channels). A detailed description
is provided in the operating instructions for SINAMICS DCM DC Converter and in Catalog
D 23.1.
Note
For this option, an Advanced CUD with DRIVE-CLiQ port (G00, G11) and a 24 V DC power
supply (L06, L07 or L09) are required.
Connection
The connection is made directly at the TM15 Terminal Module. Description of the
connections, see Catalog D23.1.
Commissioning
See the operating instructions of the SINAMICS DCM DC converter, List Manual of the
SINAMICS DCM DC converter, operating instructions of the SINAMICS DCM Cabinet,
Chapter Signal connections (Page 85).
Cable routing
The cables are routed into the cabinet corresponding to the following diagrams.
286
Operating Instructions, 04/2015, A5E36161239/RS-AA/001
SINAMICS DCM Cabinet