Siemens SINAMICS DCM Betriebsanleitung Seite 528

Options
11.3 OFF functions
Parameter setting:
p50789.0 = 0
p00849.0 = r53010.8
p00849.1 = r53010.8
p50296.0 = x
p50296.1 = x
p50296.2 = x
p50296.3 = x
p50297.0 = 0
p50297.1 = 0
p50297.2 = 0
p50297.3 = 0
p50298.0 = 0
p50298.1 = 0
p50298.2 = 0
p50298.3 = 0
p50370.0 = 0.5
p50370.1 = 0.5
p50370.2 = 0.5
p50370.3 = 0.5
p50371.0 = 0.5
p50371.1 = 0.5
p50371.2 = 0.5
p50371.3 = 0.5
p50088 = x
p50330.0 = 0
p50330.1 = 0
p50330.2 = 0
p50330.3 = 0
Cable routing
The cables are routed into the cabinet corresponding to the following diagrams.
216
This time is determined and set when commissioning the sys-
tem
Same as index 0
Same as index 0
Same as index 0
Corresponds to the factory setting
Same as index 0
Same as index 0
Same as index 0
Corresponds to the factory setting
Same as index 0
Same as index 0
Same as index 0
Corresponds to the factory setting
Same as index 0
Same as index 0
Same as index 0
Corresponds to the factory setting
Same as index 0
Same as index 0
Same as index 0
This time is determined and set when commissioning the sys-
tem
Corresponds to the factory setting
Same as index 0
Same as index 0
Same as index 0
Operating Instructions, 04/2015, A5E36161239/RS-AA/001
SINAMICS DCM Cabinet