Maintenance And Replacing The Sinamics Dcm Dc Converter - Siemens SINAMICS DCM Betriebsanleitung

9.5

Maintenance and replacing the SINAMICS DCM DC Converter

Maintenance
The maintenance work required on the SINAMICS DCM DC Converter is described in the
Operating Instructions of the SINAMICS DCM DC Converter, Chapter 11.
Software update
The software update on the SINAMICS DCM DC Converter is described in the Operating
Instructions of the SINAMICS DCM DC Converter, Chapter 11.
Replacement
Please contact our Technical Support to replace the SINAMICS DCM DC Converter. For
contact details, see Preface, Preface (Page 5).
Replacement SINAMICS DCM DC Converter devices must be equipped with option L99.
Devices without this option do not support all cabinet functions; the function of the device is
not guaranteed and safety is not guaranteed.
Exchange the adapter board for the connection to the Terminal Module Cabinet (TMC)
Figure 9-9
SINAMICS DCM Cabinet
Operating Instructions, 04/2015, A5E36161239/RS-AA/001
9.5 Maintenance and replacing the SINAMICS DCM DC Converter
WARNING
Exchanging the TMC adapter
Maintenance and servicing
129