M10, Nickel-Plated Copper Busbars; S01, Memory Card Left - Siemens SINAMICS DCM Betriebsanleitung

11.1.10

M10, nickel-plated copper busbars

Category
SINAMICS DCM DC Converter
Function
The busbars and CU-Flex are nickel-plated copper busbars; this means that in aggressive
atmospheres, an increased degree of availability can be achieved. Cabinets with rated
currents of 1500, 1600, 1900, 2000 and 2200 A have aluminum busbars as standard. Nickel-
plated copper busbars can also be supplied by specifying option M10.
11.1.11

S01, memory card left

Category
SINAMICS DCM DC Converter
Function
With Option S01, users receive a memory card for one Standard CUD or one Advanced
CUD, which is inserted in the left-hand slot.
This memory card offers the following options:
● Additional languages can be downloaded to the Advanced Operator Panel AOP30. When
using two CUDs, option S01 and option S02 must be ordered.
● Performing an offline long-time trace.
● Download the DCC block library into the drive.
● Update the firmware.
The SINAMICS Link function requires that the memory card is always inserted.
Commissioning
The memory card is supplied in the attached package, and is inserted in the memory card
slot of the CUD module during commissioning. See the SINAMICS DCM DC Converter
operating instructions
SINAMICS DCM Cabinet
Operating Instructions, 04/2015, A5E36161239/RS-AA/001
11.1 SINAMICS DCM DC Converter
Options
203