Appendix - Siemens SINAMICS DCM Betriebsanleitung

Appendix

A.1 Connectable conductor cross-sections for screw terminals
NOTICE
The information regarding the connection capability of the terminals in the tables below is
based on values from the terminal data sheets. The connecting cables must be
dimensioned for the currents that will flow.
Table A- 1 Terminal data
SPT 1.5
Terminal type
Connection capacity
Stripped length
ST2.5-Quattro / ST2.5-Quattro-PE
Terminal type
Connection capacity
Stripped length
ST4 / ST4-PE / ST4-Quattro / ST4-Quattro-PE
Terminal type
Connection capacity
Stripped length
ST6 / ST6-PE
Terminal type
Connection capacity
Stripped length
ST10 / ST10-PE
Terminal type
Connection capacity
Stripped length
ST35 / ST35-PE
Terminal type
Connection capacity
Stripped length
SINAMICS DCM Cabinet
Operating Instructions, 04/2015, A5E36161239/RS-AA/001
Spring terminal
Rigid/flexible/conductor sizes (mm
Flexible with end sleeve with/without plastic sleeve: 0.25-1.5 / 0.25-0.75 mm2
(stripped length, 8 mm)
10 mm
Spring terminal
Rigid/flexible/conductor sizes (mm
10 mm
Spring terminal
Rigid/flexible/conductor sizes (mm
10 mm
Spring terminal
Rigid/flexible/conductor sizes (mm
12 mm
Spring terminal
Rigid/flexible/conductor sizes (mm
18 mm
Spring terminal
Rigid/flexible/conductor sizes (mm
25 mm
/mm /AWG/kcmil): 0.2-1.5 / 0.2-1.5 / 24-16
2 2
/mm /AWG/kcmil): 0.08-4 / 0.08-2.5 / 28-12
2 2
/mm /AWG/kcmil): 0.08-6 / 0.08-4 / 28-10
2 2
/mm /AWG/kcmil): 0.2-10 / 0.2-6 / 24-8
2 2
/mm /AWG/kcmil): 0.2-16 / 0.2-10 / 24-6
2 2
/mm /AWG/kcmil): 2.5-35 / 2.5-35 / 14-2
2 2
A
303