Other Options; K07, Without Advanced Operator Panel Aop30; L91, Commissioning Interface (Profibus) Routed To The Outside; U09, Version According To The Requirements Of Ul - Siemens SINAMICS DCM Betriebsanleitung

Options

11.10 Other options

11.10 Other options
11.10.1

K07, without Advanced Operator Panel AOP30

Category
Other options
Function
The Advanced Operator Panel AOP30 is not provided. The AOP30 is not installed in the
cabinet door and is not supplied the equipment.
11.10.2

L91, commissioning interface (PROFIBUS) routed to the outside

Category
Other options
Function
This option is provided for systems where, during normal operation, the control is not
realized via PROFIBUS or PROFINET. For improved accessibility during commissioning and
for diagnostic purposes, the commissioning interface (PROFIBUS) is routed through the
doors of the cabinet. This interface in the cabinet door is not intended for the continuous
control of the drive. The cable bushing in the cabinet is equipped with a protective cover.
Connection
Is connected up in the manufacturer's factory.
11.10.3

U09, version according to the requirements of UL

Category
Other options
Function
The converter cabinet is designed and built corresponding to UL specifications. The option
does not include any certification. After prior agreement, a special inspection can be carried
out in the factory on request.
298
Operating Instructions, 04/2015, A5E36161239/RS-AA/001
SINAMICS DCM Cabinet