Load Types - Siemens SINAMICS DCM Betriebsanleitung

Technical specifications
10.2 General data
General technical specifications
Surface
Covering
Rack
Mounting plate
Mechanical strength
Vibratory load:
- Displacement
- Acceleration
corresponds to class
Shock load
- Acceleration
corresponds to class
Deviations from the defined classes are shown in
10.2.1

Load types

The system can be dimensioned on the basis of the load cycle so that it is adapted as
efficiently as possible to the load profile of the driven machine.
The SINAMICS DCM DC Converter is set using parameter p50067.
Table 10- 2
Load class
DC I
(p50067 = 1)
DC II
(p50067 = 2)
DC III
(p50067 = 3)
134
Dip-primed and powder-coated, RAL 7032 structure
Dip-primed, RAL 7032
Zinc-plated
Storage
1.5 mm at 2 ... 9 Hz
5 m/s² at >9 ... 200 Hz
1M2 to EN 60721-3-1
40 m/s² at 11 ms
1M2 according to
EN 60721-3-1
Load classes
Load for converter
I continuous (I
DC I
I for 15 mins and
DC II
1.5 × I
DC II
I for 15 mins and
DC III
1.5 × I
DC III
Transport
1.5 mm at 2 ... 9 Hz
5 m/s² at >9 ... 200 Hz
40 m/s² at 11 ms
italics
.
)
dN
for 60 s
for 120 s
Operating Instructions, 04/2015, A5E36161239/RS-AA/001
Operation
1.5 mm at 2 ... 9 Hz
5 m/s² at >9 to 200 Hz
3M2 according to EN 60721-
3-3
40 m/s² at 11 ms
3M2 according to EN 60721-
3-3
Load cycle
SINAMICS DCM Cabinet