Siemens SINAMICS DCM Betriebsanleitung Seite 355

Checking the shipping and handling monitors prior to commissioning
Prior to commissioning, it is essential to check the shipping and handling monitors.
Figure 3-5
The tilt indicator provides immediate visible evidence of whether the SINAMICS DCM
Cabinets have been transported and stored upright. Blue-colored quartz sand begins to flow
into the arrow-shaped indicator area. The tilt indicator has tripped when the blue color
extends beyond the middle line of the arrowhead.
Figure 3-6
The shock indicator shows if an acceleration has exceeded 98.1 m/s
the direction of acceleration. The black color of the arrows indicates that an impermissible
shock load has occurred in the direction of the arrow.
Inform Technical Support (hotline)
Commissioning must not be carried out, if an indicator has tripped. Contact Technical
Support immediately.
The contact data are provided in the preface to this document.
If commissioning is carried out without prior inspection of the indicators, safe operation of
the SINAMICS DCM Cabinet is not guaranteed. This can result in death, serious personal
injury or material damage.
SINAMICS DCM Cabinet
Operating Instructions, 04/2015, A5E36161239/RS-AA/001
Tilt indicator tripped
Shock indicator tripped
WARNING
Mechanical installation
3.3 Mounting
(10 x g) and indicates
2
43