Safety - Sirona SIVISION 3 Installationsanleitung

1 Safety

1 Safety
ATTENTION
It is essential that you comply with the warnings and safety
notes contained in the Installationsanleitung.
They are specifically identified by NOTE, CAUTION and
WARNING.
ATTENTION
The installation must be carried out in accordance with the
requirements stated in our Installationsanleitung.
ATTENTION
The installation may be performed only by personnel
authorized by Sirona.
ATTENTION
It is essential that you switch off the treatment center
PRIOR to starting the installation.
ATTENTION
Any person who assembles or modifies a medical electrical
system complying with the standard EN 60 601-1-1 (Safety
requirements for electromedical systems) by combining it
with other equipment is responsible for ensuring that the
requirements of this regulation are met to their full extent for
the safety of the patients, the operators and the
environment.
If any devices not approved by Sirona are connected, they
must comply with the applicable standards:
• EN 60950 for information technology equipment, and
• EN 60601-1 for medical electrical equipment.
In case of doubt, contact the manufacturer of the system
components.
ATTENTION
Do not use SIVISION 3 near devices which generate strong
electromagnetic fields (e. g., microwave treatment units or
mobile telephones).
ATTENTION
Interference of electromedical devices caused by radio
telephones:
To ensure the operational readiness of electromedical
devices, the use of mobile radio telephones in the practice
or hospital area is prohibited.
4
ATTENTION
When opening the equipment:
Please observe the safety measures for
handling PC boards. Touch a ground point to
remove any personal electrostatic charge
before touching the components.
ATTENTION
Use an ESD arm band.
Connect this with the protective
ground wire.
Sirona Dental Systems GmbH
59 14 200 D 3322
D 3322.031.11.04.02