Safety Instructions; General Safety Measures - GF CNC 4.0 400 Betriebsanleitung

Operating instructions CNC 4.0 400/500/630
2

Safety instructions

The CNC 4.0 400/500/630 Butt Fusion Machines are designed according
to the latest standards of technology. Using it for purposes other than
those described in this manual may cause injury to the operator or to
others. It may also cause damage to the machine or other equipment.
Any person in the company, who is involved in the assembly,
disassembly, reassembly,
(inspection, maintenance work, repair work) of
400/500/630, must have read and understood the complete instruction
manual, and in particular Section 1 on "Safety instructions".
It is recommended that the user has this confirmed in writing.
Thus:

The machine should only be used when in perfect working order.

Always follow the safety instructions.
 Complete documentation should be kept in the vicinity of the
machine.
2.1

General safety measures


Use only the materials and dimensions specified in this manual. Other
materials may only be used after consulting Georg Fischer after-sales
service.

Use only original Georg Fischer Omicron spare parts and equipment.
 Inspect the CNC 4.0 400/500/630 daily for visible signs of damage or
defects. Have damage or defects repaired immediately.

Any work on the electrical equipment may only be done by a
specialist.

Observe all the regulations, standards and guidelines applicable in
your country.
installation, operation
2 Safety instructions
or maintenance
the CNC 4.0
3