Ctc Process - GF CNC 4.0 400 Betriebsanleitung

Operating instructions CNC 4.0 400/500/630 9 Machine Set-up
The symbol * is displayed near to the selected option.
The symbol * is displayed near to REPEAT BEAD button in the
CONFIGURATION page if the selection is YES.
9.5.2

CTC Process

The basics for the CTC process developed by GF Piping Systems are the
fusion parameters according to DVS 2207-1 / DVS 2207-11 guideline.
The CTC algorithm makes the controller able to calculate the optimized
cooling time depending on the measured ambient temperature.
All other parameter are according to the DVS 2207-1 / DVS 2207-11
guidelines.
By selecting 'YES' in this menu, you set the machine for working with CTC
mode during the cooling time t5 (see chapter 8.3.4) if using DVS 2207-1
standard for PE or DVS 2207-11 standard for PP.
The symbol * is displayed near to the selected option.
55