Transport And Assembly; Packaging; Sensitivity; Intermediate Storage - GF CNC 4.0 400 Betriebsanleitung

6 Transport and assembly

14
6 Transport and assembly
6.1

Packaging

A decisive factor in the choice of packaging is the means of transport.
Usually the machine and all the accessories are delivered in a wooden
case.
6.2

Sensitivity

Special care must be taken when transporting the machine in order to
prevent damage from impact or improper loading and unloading.
All movable parts must be fixed in place.
Transport insurance should be provided for according to the type and
duration of transport. Condensation due to large temperature
fluctuations and sharp jolts during shipment should be avoided.
Please handle the machine with care.
6.3

Intermediate storage

If the machine is not used immediately upon delivery, the machine must
be stored in a safe place and properly covered.
6.4

Scope of delivery

The contents (number of transport crates, pallets, packages) and their
condition should be checked immediately upon receipt. Any damage
and/or missing parts should be noted right away on the bill of lading
and reported to Georg Fischer Omicron S.r.l. without delay.
Operating instructions CNC 4.0 400/500/630