Welding; Welding According Given Standards; Selection Of The Welding Standard - GF CNC 4.0 400 Betriebsanleitung

8 WELDING

Attention
22
8 WELDING
For butt fusion with a heating element, the parts to be joined
(pipe/pipe, pipe/fitting
temperature in the fusion area and are fused under pressure without the
use of additional materials.
Various country specific standards are applicable; these standards differ
in the pressure, time and temperature values.
Only the same type of materials are to fuse.
The wall thicknesses in the fusion area need to be the same.
Correct
Only the same wall thicknesses in the fusion area!
Select in the Home Page the button WELDING. This menu consists of the
material selection, the preparation of the welding and the automated
welding process itself.
8.1

Welding according given standards

8.1.1

Selection of the welding standard

Select the applicable
automatically to the next page.
By pushing the button
information, that is the operator/job codes (see chapters 9.5.4/9.5.5)
and the optional data (see chapter 10.1), which will be included in the
fusion protocol together with the fusion parameters.
Operating instructions CNC 4.0 400/500/630
or fitting/fitting)
Incorrect
standard and material,
it is possible to check the complementary
are heated to
then it moves
fusion