8 WELDING
Attention
Attention
Attention
42
If carriage slides during the cooling time (this can be caused for example
by premature opening of the clamps), the process stops and the
following error message appears:
By pushing the button
(see chapter 8.3.5).
The cooling phase could be interrupted at any time by pushing the button
. After this action the following error message appears:
By pushing the button
(see chapter 8.3.5).
Stopping the on-going fusion process will result in a suspicious welding:
the responsibility will be in charge of the operator.
Operating instructions CNC 4.0 400/500/630
the display moves to the Error Codes page
the display moves to the Error Codes page