Start Weldinair On Ios - GF CNC 4.0 400 Betriebsanleitung

Operating instructions CNC 4.0 400/500/630 10 Data
Go back to HOME PAGE. On the smartphone, open the Bluetooth
menu and search for the available devices. The CNC 4.0 control
unit device will always appear with a name starting with "S156G";
press on it to pair it with the smartphone.
When the unit name moves in the list of the paired devices, the
smartphone is properly configured and ready to start.
As soon as the WeldinaAir application is started, the icon on the
HOME PAGE will stop blinking.
10.5.2

Start WeldinAir on iOS

The pre-requisite to use the WeldinAir application is to pair and bond
with the control unit, so they can communicate each other.
Switch on the hydraulic unit and wait until the HOME PAGE is shown.On
the smartphone, from the WeldinAir application main screen press the
icon. Then the following screen will be shown. Press the grey button
with the four blue lines
71