Welding Standard; Reset Internal Memory - GF CNC 4.0 400 Betriebsanleitung

Operating instructions CNC 4.0 400/500/630
Attention
Attention
CNC 4.0 630 has to be chosen if working with the standard heating
element provided with the machine (plate thickness = 40 mm).
CNC 4.0 630 HE 32 has to be chosen if working with the former heating
element version (plate thickness = 32 mm).
9.4.3

Welding standard

This menu offers the possibility to choose the set of welding standards
available for operator selection during the welding processes (see
chapter 8.1.1).
Push the correspondent button and the selected set will be displayed at
the top of the page.
The selected welding standard set is memorized by the controller and it
will be available at each activation of the hydraulic unit.
9.4.4

Reset internal memory

It is possible to cancel all the fusion protocols stored in the internal
memory.
Press button YES and the following page will be displayed:
9 Machine Set-up
53