Operating instructions CNC 4.0 400/500/630
11 FREE welding standard
11 FREE welding standard
If you need to weld according to special parameters not included in
the available standard sets, the FREE welding procedure could be used.
By selecting a free programmable welding cycle the definition of the
welding parameters is done by the operator!
The responsibility for the welding is exclusively with the operator!
Warning
Push the button FREE in the welding standard selection page (see
chapter 8.1.1).
Ten different customized welding cycles can be saved: push the
correspondent button to select the cycle to be used.
11.1
Name of the welding cycle
If the free cycle has been already set-up, push button ► to move to
the next page.
If you need to change it or create a new one, type the name of the
welding cycle and confirm it by pressing Enter button; then move to
next line by pushing the down arrow, type the name of welded material
and confirm it with Enter. Push button ► to move to the next page.
73