Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating instructions ECOS 160/250/315
2
Safety instructions
The ECOS 160/250/315 Butt Fusion Machines are designed according to the latest
standards of technology. Using it for purposes other than those described in this
manual may cause injury to the operator or to others. It may also cause damage to the
machine or other equipment.
Any person in the company, who is involved in the assembly, disassembly,
reassembly, installation, operation or maintenance (inspection, maintenance work,
repair
ECOS 160/250/315, must have read and understood the complete instruction manual,
and in particular Section 1 on "Safety instructions".
It is recommended that the user has this confirmed in writing.
Thus:
•
The machine should only be used when in perfect working order.
•
Always follow the safety instructions.
Complete documentation should be kept in the vicinity of the machine.
2.1
Proper use
The ECOS 160/250/315 are to be used exclusively for the fusion of pipes and fittings
made of PE, PP. Any other use is not permitted.
2.2
General safety measures
•
Use only the materials and dimensions specified in this manual. Other materials
may only be used after consulting Georg Fischer Omicron after-sales service.
•
Use only original Georg Fischer Omicron spare parts and equipment.
•
Inspect the ECOS 160/250/315 daily for visible signs of damage or defects. Have
damage or defects repaired immediately.
•
Any work on the electrical equipment may only be done by a specialist.
•
Observe all the regulations, standards and guidelines applicable in your country.
2.3
Working with safety in mind
"Make your contribution to safety in the workplace."
•
Report any deviations from normal operation immediately to the person in charge.
work)
2 Safety instructions
of
the
3
Werbung
Inhaltsverzeichnis
