Bluetooth Connection With Weldinair Version; Start Weldinair On Android - GF CNC 4.0 400 Betriebsanleitung

10 Data
70
It is also possible to print the label later on from the menu View Internal
Memory (see chapter 10.2.3): just connect the printer, select the
protocol and push the
10.5 Bluetooth connection with WeldinAir
version
WeldinAir is an Android/iOS application designed to work in
combination with the CNC 4.0 units equipped with Bluetooth
communication device. The WeldinAir application supports Android
operating systems, at least from version 7, on smartphones supporting
Bluetooth Low Energy technology. This application is available for free in
the Goole "Play Store". WeldinAir is also supporting iOS operating
systems, at least from version 11, on iPhones supporting Bluetooth Low
Energy technology. The application is available in the Apple "App
Store". The link to the WeldinAir application is available in the list of all
available applications and identified by the following icon.
Please, follow the WeldinAir User Guide (available in the USB stick
provided with the machine) to start the WeldinAir application.
10.5.1

Start WeldinAir on Android

The pre-requisite to use the WeldinAir application is to pair and bond
with the control unit, so they can communicate each other. Switch on
the hydraulic unit and wait until the HOME PAGE is shown, then go to
machine settings page (see chapter 9.4). Select BLUETOOTH, then press
BONDING button to activate the pairing and bonding feature on the
unit.
Operating instructions CNC 4.0 400/500/630
button on the screen.