Error/Warning Messages - GF CNC 4.0 400 Betriebsanleitung

12 Error/Warning messages

Message
PLEASE WAIT
WELDING
INTERRUPTED!
POWER
SWITCHED OFF
Next revision:
MM YYYY
Unit revision
expired!
76
12 Error/Warning messages
Display page Meaning
Dedicated The pump
page.
automatically
to warm-up
Dedicated Power to the
page,
appearing cut off during
immediately the welding
after
switching the
unit ON.
GENERAL
INFORMATION recommended
ABOUT THE to get the
UNIT complete
machine
serviced by this
date to retain
the proper
reliability and
GENERAL
INFORMATION complete
ABOUT machine
THE UNIT serviced right
guarantee the
proper level of
reliability and
Operating instructions CNC 4.0 400/500/630
Possible causes
Ambient
temperature
motor is
running
the unit.
1) Lack of fuel in
unit was the generator
2) Connecting
process.
cables went
damaged or
disconnected
3) Main switch
was turned OFF
It is Less than three
months left to
expiration of the
maximum
recommended
maintenance
schedule interval.
level of
safety.
Get the Maximum
recommended
maintenance
schedule interval
now to has expired.
safety.
Wait 2 minutes.
 5°C
1) Take care of
refueling
2) Check cable
wires section, cable
protection on
jobsite
Bring the complete
machine to a
certified Georg
Fischer service
Bring the complete
machine to a
certified Georg
Fischer service
Actions
station.
station.