Mark Joint; Save Protocol - GF CNC 4.0 400 Betriebsanleitung

8 WELDING
Attention
44
8.3.6

Mark joint

After welding conclusion, an individual joint number could be inserted
to the welding record.
Use the touch key board to input the code (maximum 6 alphanumerical
digits), then confirm by pressing the button Enter.
Push the button ►to go to next step.
If errors occurred during the welding process, the message ERROR
OCCURRED, CHECK PROTOCOL! is displayed (see chapters 10.2.3/12)
8.3.7

Save protocol

The individual fusion code typed by keyboard and the reference total
number are both shown in the upper-right side of the display.
If right, confirm by pusing the OK button: the fusion protocols is recorded
in the internal memory and the display moves automatically to the next
page.
The status of the internal memory is also displayed (number of welding
records stored in the internal memory / 1000
capacity).
Operating instructions CNC 4.0 400/500/630
records maximum