Attaching The Ferrite Core; Factory Reset - DAB DCONNECT BOX Anleitung

13. Attaching the ferrite Core

Figure 11 - Position of the Ferrite Core
Before turning the power on, in order to reduce electromagnetic interference conducted and irradiated by power and
data cables, attach the supplied ferrite cores.
Ferrite cores on the power-output cable, ss shown in the illustration. Make 2 turns of cable through the Ferrite core.

14. Factory Reset

It is possible to delete the user settings of the DConnect Box including wireless associations, saved Wifi
networks and Modbus Adapter configurations.
Press both buttons of the DConnect Box for 15 seconds, until the red LED blinks twice and a long beep is
heard.
The DConnect Box will not delete the list of previously connected devices.
It is therefore restricted to a maximum of 8 devices.
ENGLISH
62