Technical Characteristics - DAB DCONNECT BOX Anleitung

Technical characteristics

Power supply
Electrical current
Grade of protection
Wi-Fi e BT
Ethernet
Wireless
Certifications
KEY
In this document, the following symbols have been used:
Situation of general danger. Failure to respect the instructions that follow may cause harm to persons and
property.
Notes and general information
WARNINGS
Read this document carefully before installing and always refer to the manuals of each product to
be connected by means of the DConnect Box.
Installation and operation must comply with the local safety regulations in force in the country in which
the product is installed. Everything must be done in a workmanlike manner.
Failure to respect the safety regulations not only causes risk to personal safety and damage to the
equipment, but invalidates every right to assistance under guarantee.
Skilled personnel
It is advisable that installation be carried out by competent, skilled personnel in possession of the
technical qualifications required by the specific legislation in force.
The term skilled personnel means persons whose training, experience and instruction, as well as their
knowledge of the respective standards and requirements for accident prevention and working conditions,
have been approved by the person in charge of plant safety, authorizing them to perform all the nec-
essary activities, during which they are able to recognize and avoid all dangers. (IEC 60730).
Safety
Use is allowed only if the electric system is in possession of safety precautions in accordance with the
regulations in force in the country where the product is installed. Check that the DConnect Box has not
been damaged.
It is indispensable to check that all the leads and accessory cables are correctly inserted in the respective
clamps.
Failure to observe the warnings may create situations of risk for persons or property and will void the product guarantee.
RESPONSIBILITY
The Manufacturer does not vouch for correct operation of the electropumps or answer for any damage that they
may cause if they have been tampered with, modified and/or run outside the recommended work range or in
contrast with other indications given in this manual.
The Manufacturer declines all responsibility for possible errors in this instructions manual, if due to misprints or errors
in copying. The Manufacturer reserves the right to make any modifications to products that it may consider necessary
or useful, without affecting their essential characteristics.
Introduction
ENGLISH
12 V
1,5 A
IP20
Support 802.11 b/g/n, WPA-PSK/WPA2-PSK encryptions
Support BLE 4.2 (only version 2.0)
Conforming to standards IEEE802.3 10Base-T e 100Base-TX
DAB Wireless Communication 2.4GHz
CE, EAC, FCC, ICASA
34