Technical Documentation; Risk Assessment; Accessories/Parts For The Product - Hürner HWT 400–WeldControl Bedienungsanleitung

H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
We also declare that the equipment we manufacture conforms to the
directive 2002/95/EC on the restriction of the use of certain hazard-
ous substances in electrical and electronic equipment (so-called RoHS
Directive).
8.1

Technical Documentation

Wiring diagrams, computer-assisted designs and further technical
literatures, as complements or more in depth, will be gladly provided
by HÜRNER Schweisstechnik upon request at the address given above.
8.2

Risk Assessment

A risk assessment under the provisions of the so-called machinery
directive 2006/42/EC was conducted for the machine by a qualified
person entitled to the performance of such an assessment.
9

Accessories/Parts for the Product

Master Clamps for Crosspieces 90 deg. O.D. 315
Reducer Inserts for Crosspieces 90 deg.
Master Clamps f/ Y Branch-offs 45/60 deg. O.D. 315 200-260-407
Reducer inserts for Y Branch-offs 45/60 deg.
Special Reducer for Short Radius 90 mm 22.5 deg.
Special Reducer for Short Radius 90 mm 30 deg.
Special Reducer for Short Radius 110 mm 22.5 deg. 400-148-000
Special Reducer for Short Radius 110 mm 30 deg.
Welding Neck Support O.D. 90 - 315
Additional, Supporting Cylinder for Clamp
Support Stand for Pipes
Replacement Blade for Facing Tool
Only genuine spare parts are acceptable. The use of non-
genuine parts voids any and all liability and warranty on the
part of the manufacturer.
Info
For consultation and ordering spare parts, refer to the seller or manu-
facturer of the product.
Version January 2020 HÜRNER HWT 400–WeldControl User's Manual
200-260-405
200-260-406
200-260-408
400-146-000
400-147-000
400-149-000
200-604-315
200-260-410
400-155-000
315-109-026
35
EN