Control Terminal; Technical Specifications - Hürner HWT 400–WeldControl Bedienungsanleitung

H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany

3.2.2 Control Terminal

3.2.4 Technical Specifications
HWT 400–WeldControl
Power Supply Specifications
Voltage
Frequency
Power overall
Power Heating Element
Power Facing Tool
Power Hydraulic Unit
Power Other Devices
Version January 2020
3 Ph/PE, 400 V AC ± 10%
50/60 Hz
9 kW
5 kW
1.85 kW
1.50 kW
0.65 kW
HÜRNER HWT 400–WeldControl User's Manual
Facing Tool
Reducer Inserted into
Master Clamping Assembly
Master Clamping Assembly
(steel clamping assembly shown; refer to
Sect.. 3.4 for more information)
Heating Element under Housing
Facing Tool Support Bracket Set
on Rails for Transverse Facing
Tool/Heating Element Movement
Facing Tool Power Supply
(cord not shown)
Control Terminal
Mains Supply Cord 400 V
On/Off Switch
(doubling as emergency off switch)
Maintenance Door
Maximum Pressure Regulator
Carriage Mover Lever
Display Screen
Cursor and MENU Keys
Manual Pressure Release Regulator
START/SET and
STOP/RESET Keys
Full Pressure Release Valve
USB A Port and Power Supply
Outlet for Optional Label
Tag Printer
(at the bottom of the control terminal)
9
EN