Cleaning And Care; Troubleshooting - Vitek VT-1991 ST Die Betriebsanweisung

ENGLISH
Whip eggs with sugar, pour into the form (6).
1.
Add softened butter, flour and leaven.
2.
Load the chopped apples in the container (4).
3.
Bake after setting the «CAKE» program.
4.

CLeaNING aNd Care

Unplug the unit and let it cool down.
–
Wipe the body and lid (3) with a wet cloth.
–
Wash baking forms (6), paddles (7), measuring cup (8), spoon (9) and hook (10) in warm water
–
with neutral detergent.
Note: If the paddles (7) can not be removed from the axle, fill the form (6) with warm water and wait
for about 30 minutes.
You may also wash the forms (6) and the paddles (7) in a dishwasher.
Dry forms (6) and paddles (7) carefully before fixing them in the bread maker.
–
Do not immerse the unit, power cord and cord plug into water or other liquids.
–
Storage
Before storage clean bread maker and wait till it is completely dry.
–
Store the unit in a cool dry place away from children.
–

TrOUBLeSHOOTING

PrOBLem
Symbols «ЕЕ00» on the
display, accompanied by
repeated sound signals
Symbols «EEE01» appear on
the display, accompanied by
5 sound signals
Symbols «ЕЕE» on the
display, accompanied by
repeated sound signals
Symbols «HHH» on the
display, accompanied by
repeated sound signals
Smoke from the ventilation
openings (4)
The baked bread dropped,
the bottom part of the
bread is damp
The bread has stuck to the
walls of the baking form
VT-1991 IM.indd 14
CaUSe
Low temperature in the
process chamber
The unit has not cooled
down after the previous
baking cycle
Temperature sensor broke
Temperature sensor is not
working because of short
circuit
Ingredients got onto the
heating element
The bread has stayed in the
bread maker for too long
after baking
The bottom part of the
bread has stuck to the
kneading paddle
14
Solution
Switch the unit off, open the lid and
wait for 10-20 minutes.
Unplug the unit, take the form
out, let the unit cool down at room
temperature
Switch the unit off and contact the
authorized service center
Switch the unit off and contact the
authorized service center
Switch the unit off by unplugging the
power cord plug from the socket. Take
the form out, let the unit cool down. Wipe
the walls of the process chamber and the
heating element with a wet cloth.
When making bread according to this
recipe switch the unit off immediately
after the bread is ready
Grease the paddles with oil before
assembly
23.12.2011 9:31:50