Electric Seat Functions - Otto Bock B500-S Bedienungsanleitung

The charging process is indicated by the battery seg-
ments lighting up one after the other. When the battery is
charging, the driving function is blocked.
Display symbol(s)
Table 3 Battery indicator on the control panel
B500 | B500-S
Information
Driving menu with speed
level and battery capacity
Low battery capacity
Charging process with
drive stop
Battery is under voltage,
with warning symbol
Battery is over voltage,
with warning symbol
7.3.5 Electric Seat functions
nOTE !
Please note that your power wheelchair may
always be equipped with a maximum of two
electric seat functions at a time.
Should the electric footrests be controlled in-
dividually, they operate as two independent

electric seat functions.

If the electric footrests, left/right can be con-
trolled jointly, they operate as an electric seat
function.
The electric seat functions, such as electric back angle
adjustment or seat tilt, are also activated by pressing the
button "M" (approx. 2 seconds). Moving the joystick to
the right lets you switch between the different functions.
The function that is currently selected is shown on the
LCD monitor.
The respective function can be extended or retracted by
moving the joystick ahead or back. The electric motor
moves the respective function as long as the joystick is
deflected, and stops at the end positions.
03/2010
Operation
Page 115