Caster Wheel Swivel Lock; Electrically Adjustable Footrests; Figure 36 Caster Wheel Swivel Lock Engaged And - Otto Bock B600 Bedienungsanleitung

7.3

Caster Wheel Swivel Lock

To navigate ramps or enter lifts, the wheelchair must be
driven in completely straight line. An option that locks the
caster wheels in the straight ahead position so that turning
is impossible is available for the B600 power wheelchair.
Engaging the caster wheel swivel lock:
n
Slightly rotate the folding lever on the anterior frame to
the side, allowing it to jump out of the mid-position.
n
The bolt below the anterior frame extends and engages
in the front caster fork as soon as the wheelchair reach-
es the straight ahead position (see Figure 36, left photo).
Now the power wheelchair can only drive straight forward
or backward.
Releasing the caster wheel swivel lock:
n
Turn the folding lever back to its mid-position; the front
caster fork is released so it can move freely.
n
The lever engages in the centre of the anterior frame in
an unlocked position (see Figure 36, right photo).
B600
Downloaded from www.Manualslib.com manuals search engine
Figure 36 Caster wheel swivel lock engaged and released
7.4

Electrically Adjustable Footrests

INFORMATION
The seat function actuators are not intended for continu-
ous use, but only for short-term limited operation. General
recommendation: At maximum load capacity, 10 seconds
of operation should be followed by 90 seconds of idle
time. The electric seat functions are considered independ-
ently of the driving function for this purpose.
02/2009
Accessories
Page 147