Device Wiring; Connector; D-Sub Connector; Screw Terminal - TR-Electronic _LLB500(F)-00601 Benutzerhandbuch

Installation

6.2 Device wiring

6.2.1 Connector

6.2.1.1 D-Sub connector

6.2.1.2 Screw terminal

No.1
 TR-Electronic GmbH 2011, All Rights Reserved
Page 114 of 156
Pin Designator Description
1 Rx
RS-232 receive line
2 Tx RS-232 send line
3 T- - RS-422 send line negative
- SSI data output negative
(only for LLB-500(F) and if configured for SSI)
4 T+ - RS-422 send line positive
- SSI data output positive
-(only for LLB-500(F) and if configured for SSI)
5 R- - RS-422 receive line negative
- SSI clock input negative
(only for LLB-500(F) and if configured for SSI)
6 R+ - RS-422 receive line positive
- SSI clock input positive
(only for LLB-500(F) and if configured for SSI)
7 PWR DC Power
+ 9 V...+30 V for LLB
8
+24 V...+30 V for LLB (with heating)
9 DO 1 Digital output 1 (Open Drain) or Digital input 1
10 DO 2 Digital output 2 (Open Drain)
11 DO E Digital output for error signalization (Open Drain)
12 AGND Analog ground
13 AO Analog output (0/4..20 mA)
14 GND Ground line
15 GND Ground line
Pin Designator Description
1 R+ - RS-422 receive line positive
- SSI clock input positive
2 R- - RS-422 receive line negative
- SSI clock input negative
3 T+ - RS-422 send line positive
- SSI data output positive
4 T- - RS-422 send line negative
- SSI data output negative
5 Tx RS-232 Transmit line
6 Rx RS-232 Receive line
7 AGND Analog ground
8 AO Analog output (0/4..20 mA)
9 DO E Digital output for error signalization (Open Drain)
10 DO 2 Digital output 2 (Open Drain)
11 DO 1 Digital output 1 (Open Drain) or Digital input 1
12 GND Ground line
13 PWR Power DC
+24 V...+30 V LLB (with heating)
TR - ELE - BA - DGB - 0021 - 06
(only for LLB-500(F) and if configured for SSI)
(only for LLB-500(F) and if configured for SSI)
(only for LLB-500(F) and if configured for SSI)
(only for LLB-500(F) and if configured for SSI)
+9 V...+30 V LLB
Printed in the Federal Republic of Germany
03/09/2016