Introduction - TR-Electronic _LLB500(F)-00601 Benutzerhandbuch

Introduction

3 Introduction
The LLB or LLB-H with optional with heating, is a powerful distance-measuring instrument for
integration into industrial applications. It allows accurate and contactless distance measurement over
a wide range using the reflection of a laser beam:
Figure 1: Standard application
Key features:
●
Compatible with TR LLB-60 (H) Laser Distance Sensor
●
LLB-65 / LLB-500(F) measurement range on natural surfaces 0.05 m up to approx. 65 m or
0.05 m to approx. 80 m on natural surface characteristic, see chapter 5.4.1 on page 108.
●
LLB-500(F) measurement range on (reflective) target plate 0.5 m up to approx. 500 m
●
Serial interface (RS232 and RS-422)
●
SSI interface (LLB-500(F) only)
●
Connection of up to 10 devices on a single RS-422 line
●
Wide range power supply (9...30 VDC), heating option (24...30 VDC)
●
Programmable analog output (0/4...20 mA)
●
Two programmable digital outputs (DO1 and DO2)
●
Digital output for error signalization (DOE)
●
One programmable digital input (DI1)
●
ASCII protocol to control external displays
●
D-Sub connector and screw terminal joint for easy connection
●
IP65 (protected against ingress of dust and water)
●
4 LEDs for status signaling
●
Complementary configuration software
●
Optional: Internal heater for device operation down to -40 °C
●
Laser class II (<0.95 mW)
●
Accessories for easy use of the sensor
For easy startup with the device, please download and use the free configuration
software "LLB-Utility" with the link "www.tr-electronic.de/f/zip/TR-ELE-SW-MUL-0001"
or from the Support DVD.
 TR-Electronic GmbH 2011, All Rights Reserved
Page 94 of 156
(www.tr-electronic.com/service/downloads/software.html)
TR - ELE - BA - DGB - 0021 - 06
Printed in the Federal Republic of Germany
03/09/2016