Technical Data - TR-Electronic _LLB500(F)-00601 Benutzerhandbuch

Specifications

7.4 Technical data

Typical measuring accuracy for:
LLB65-00600, LLB65-00610
LLB65-00601, LLB65-00611
LLB500(F)-00600, LLB500(F)-00610
LLB500(F)-00601, LLB500(F)-00611
Accuracy of the analog output
LLB-65:
LLB-500(F):
Typical measuring accuracy for:
LLB65-00600, LLB65-00610
LLB65-00601, LLB65-00611
LLB500(F)-00600, LLB500(F)-00610
LLB500(F)-00601, LLB500(F)-00611
Smallest unit displayed:
Measuring range LLB-65, LLB-500(F) on natural surfaces:
Measuring range LLB-500(F) on orange (reflective) target plate:
See chapter 11 "Accessories" on page 155.
Measuring reference:
Typical diameter of laser spot at target at a distance of
(diffraction rings)
Time for a measurement:
- Single measurement
LLB-65 / LLB-500(F)
- Tracking
3)
LLB-65
LLB-500
LLB-500F
Max target speed:
only LLB-500F while moving target characteristic is active
Light source:
ESD:
EMC:
...
 TR-Electronic GmbH 2011, All Rights Reserved
Page 122 of 156
1)
1)
1) 3) 4)
1) 3)
1)
1)
1)
1)
3)
:
:
3)
:
3)
:
TR - ELE - BA - DGB - 0021 - 06
± 1.5 mm at 2 σ
± 3.0 mm at 2 σ
± 1.0 mm at 2 σ
± 3.0 mm at 2 σ
(see chapter 10.3.4.3 "Set/Get distance range (sNv)")
0.2 % programmed span (12 bit)
0.1 % programmed span (12 bit)
± 0.4 mm at 2 σ
± 0.5 mm at 2 σ
± 0.3 mm at 2 σ
± 0.5 mm at 2 σ
0.1 mm
0.05 m to approx. 65 m (80 m on natural surface characteristic
approx. 0.5 m to 500 m
from front edge (see chapter 7.5 "Physical dimensions")
5)
4 mm at 5 m
8 mm at 10 m
15 mm at 30 m
typical: 300 ms to 4 s
typical: 150 ms to 4 s
typical: 40 ms to 4 s
typical: 4 ms to 4 s
typical: 10 m/s up to 150 m
7 m/s up to 500 m
Laser diode 620-690 nm (red);
IEC 60825-1; Class 2;
FDA 21CFR 1040.10 and 1040.11;
Beam divergence: 0.16 x 0.6 mrad;
Pulse duration: 0.45 x 10
Maximum radiant power: 0.95 mW
IEC 61000-4-2
EN 61000-6-4
EN 61000-6-2
-9
s;
Printed in the Federal Republic of Germany
03/09/2016
3)
)