General Risks When Using The Product; Intended Use - TR-Electronic _LLB500(F)-00601 Benutzerhandbuch

2.3 General risks when using the product

The product, hereinafter referred to as "the measuring system", is manufactured
according to state-of-the-art technology and accepted safety rules. Nevertheless,
improper use can pose a danger to life and limb of the user or third parties, or
lead to impairment of the measuring system or other property!
Only use the measuring system in a technically faultless state, and only for its
designated use, taking safety and hazard aspects into consideration, and observing
this User Manual! Faults which could threaten safety should be eliminated without
delay!

2.4 Intended use

The measuring system is used to measure linear movements and to condition the
measurement data for the subsequent control of industrial control processes.
Particularly the measuring system is designed for the use of distance measurements
for the detection of the position and positioning of:
• High-bay storage devices and lifting gears
• Crane systems
• Side-tracking skates and truck storage vehicles
• Transfer machines
Intended use also includes:
• observing all instructions in this Assembly Instruction and the interface-specific
User Manual,
• observing the nameplate and any prohibition or instruction symbols on the
measuring system,
• observing
configurations etc.,
• observing the operating instructions from the machine or system manufacturer,
• operating the measuring system within the limit values specified in the technical
data (Assembly Instruction / User Manual).
Printed in the Federal Republic of Germany
03/09/2016
the enclosed documentation,
TR - ELE - BA - DGB - 0021 - 06
e.g. product insert,
 TR-Electronic GmbH 2011, All Rights Reserved
connector
Page 89 of 156