Components; Validity - TR-Electronic _LLB500(F)-00601 Benutzerhandbuch

Introduction

3.2 Components

1 Status LEDs
status signaling
2 15-Pin D-Sub connector
RS-422, RS-232, SSI, analog, digital output
3 Cable gland (M16 x 1.5 mm)
for connection cable insertion
4 Cover
provides access to electrical components
5 Reset switch
resets the LLB to default settings

3.3 Validity

This manual is valid for LLB65 and LLB-500 devices with the following software version:
- Interface software version:
- Device software version:
and LLB-500F devices with the following software version:
- Interface software version:
- Device software version:
To get the software version for the LLB use the command described in 10.3.10 "Get Software Version
(sNsv)" on page 145.
 TR-Electronic GmbH 2011, All Rights Reserved
Page 96 of 156
6 Screw terminal
RS-422, RS-232, SSI, analog, digital output
7 ID switch
defines the device ID for RS-422 operation
8 Laser beam outlet
9 Receiver optics
10 Product label
see 2.9 on page 92.
0300
0300
0500 or higher
0400 or higher
TR - ELE - BA - DGB - 0021 - 06
Printed in the Federal Republic of Germany
03/09/2016