Werbung
Verfügbare Sprachen
Verfügbare Sprachen
PLAY | PAUSE button
•
With this button, you can pause the blending process for up to 2 minutes. Press
the button another time and the appliance will continue blending at the set speed
and clocking the time.
•
The Pause function will also be activated if you lift the blender jug from the base
during operation. To restart operation, replace the blender jug onto the base and
press the START button.
START | CANCEL button (repeat function)
•
If you have finished setting the speed with the speed control dial and press the
START|CANCEL button or if the timer has run out, meaning the appliance has
been blending for 6 minutes, the set speed will be saved for 2 minutes so you
can quickly start a second cycle, if necessary.
•
Pressing the button again will start the second cycle.
•
If you wish to delete the speed setting, press and hold the START|CANCEL but-
ton for 2 seconds.
Energy Saver Mode
•
If you don't press any button or dial on the high-speed blender for 2 minutes,
the LCD screen will switch off and the ON|OFF button will flash red.
•
Should you not operate the appliance in the next 5 minutes, it will completely
switch off. To restart the high-speed blender, press the ON|OFF button again.
Count-up Timer
•
If the timer is disabled, the appliance will count up the blending time in the LCD
screen. When using the timer this way, the blender will automatically stop after
6 minutes. Of course, you can manually stop the blending function before that.
Count-down Timer
•
You can set the timer before starting the mixing process. In this case, press the
or
buttons to set the desired blending time. The LCD screen will count
down until it reaches „0" and automatically stop.
119
Werbung
