Werbung
Verfügbare Sprachen
Verfügbare Sprachen
O V E R L O A D - P R O T E C T I O N
Warning:
Please do not attempt to use the blender while the
„OVERLOAD PROTECTION" is flashing.
If the motor of the Solis high-speed blender Extreme Power Blender Pro is over-
loaded, the motor will automatically shut down to protect itself. The warning sym-
bol „OVERLOAD PROTECTION" will flash in the LCD screen.
Deactivate the appliance with the ON|OFF button, pull the plug and wait a cou-
ple of minutes to let the motor cool down. Plug the power plug back into the
socket and press the ON|OFF button another time. When the motor has cooled
down, the warning symbol will stop flashing and you can continue using the high-
speed blender as described in this manual.
Caution: Only after the warning symbol has stopped flashing, you shall continue
blending.
Warning:
Do not operate the appliance continuously with heavy loads for more than
10 seconds.
117
Werbung
