Alpinestars Supertech RK-10 PLASMA Handbuch Seite 3

IMPORTANT USER INFORMATION: EN 1621-1:2012
1. GET TO KNOW THE SUPERTECH RK-10 PLASMA KNEE BRACE
1. GET TO KNOW THE SUPERTECH RK-10 PLASMA KNEE BRACE
Throughout this guide, numbers (in brackets) refer to the parts in this diagram.
Throughout this guide, numbers (in brackets) refer to the parts in this
10
11
16
13
REAR/SIDE VIEW
REAR/SIDE VIEW
3
7
6
8
FRONT/SIDE VIEW
FRONT/SIDE VIEW
2 FITTING PROCEDURE
2. FITTING PROCEDURE
In order to provide the most effective performance it is absolutely essential that the
In order to provide the most e ective performance it is absolutely essential that the
correct size of Knee Brace is selected AND that it is adjusted correctly to your knee. The
correct size of Knee Brace is selected AND that it is adjusted correctly to your knee. The
fitting must be conducted in conjunction with the other items of clothing you normally
tting must be conducted in conjunction with the other items of clothing you normally
wear while riding (knee brace sleeves, boots, pants). Note that pants must be worn over
wear while riding (knee brace sleeves, boots, pants). Note that pants must be worn ove
the Alpinestars Knee Brace.
the Alpinestars Knee Brace.
The braces are NOT symmetrical. Out of the box the knee braces are setup with the
The braces are NOT symmetrical. Out of the box the knee braces are setup with the Loop
Loop Pull Tabs (15) already fitted on the inner-leg side of the knee brace. Identify the
Pull Tabs (15) already tted on the inner-leg side of the knee brace. Identify the correc
correct brace (left or right) for the leg that will be fitted, the left and right side braces
are also marked with a removable sticker attached on the knee cup system (5) for easy brace (left or right) for the leg that will be tted, the left and right side braces are also
identification.
IMPORTANT USER INFORMATION: EN 1621-1:2012
12
4
5
9
1
14
2
1
UPPER X-STRAP
1) Upper X-Strap
2
LOWER X-STRAP
2) Lower X-Strap
3
BUCKLE TYPE - L
3) Buckle Type - L
4
UPPER FRAME
4) Upper Frame
5 KNEE CUP SYSTEM
5) Knee Cup System
6
HINGE COVER & RESIN STICKER
6) Hinge Cover & Resin Sticker
7
EXTENSION STOPS
7) Extension Stops
8
BUCKLE TYPE - S
8) Buckle Type - S
9
LOWER FRAME
9) Lower Frame
10
UPPER FRAME PADDING
10) Upper Frame Padding
11
UPPER PATELLA PADDING
11) Upper Patella Padding
12 HINGE PADDING
12) Hinge Padding
13
LOWER FRAME PADDING
13) Lower Frame Padding
14
LOGO PULL TABS
14) Logo Pull Tabs
15
LOOP PULL TABS
15) Loop Pull Tabs
16
LOWER PATELLA PADDING
16) Lower Patella Padding
15
3 EN