IMPORTANT USER INFORMATION: EN 1621-1:2012
This product contains armor certified to EN 1621-1:2012. Motorcyclists' protectors
This product contains armor certified to EN 1621-1:2012. Motorcyclists' protectors are
considered PPE (Personal Protective Equipment) under European Regulation EU 2016/425
are considered PPE (Personal Protective Equipment) under European Regulation EU
and as such an EU Type Examination has been conducted on this product by Notified
2016/425 and as such an EU Type Examination has been conducted on this product
Body #0498, Ricotest, Via Tione 9, Pastrengo, VR, 37010, Italy. Reading this booklet will
by Notified Body #0498, Ricotest, Via Tione 9, Pastrengo, VR, 37010, Italy. Reading
help you correctly customize your Knee Brace and help ensure its continued performance
this booklet will help you correctly customize your Knee Brace and help ensure its
throughout the product life.
EU DECLARATION OF CONFORMITY & UKCA DECLARATION OF CONFORMITY
EU DECLARATION OF CONFORMITY & UKCA DECLARATION OF
The EU Declaration of Conformity of this PPE can be downloaded at: eudeclaration.alpine-
CONFORMITY
stars.com
The EU Declaration of Conformity of this PPE can be downloaded at:
eudeclaration.alpinestars.com
INFORMATION CONTAINED IN THE PRODUCT MARKING
The UKCA Declaration of Conformity of this PPE can be downloaded at:
ukcadeclaration.alpinestars.com
INFORMATION CONTAINED IN THE PRODUCT MARKING
EN 1621-1:2012
EN 1621-1:2012
RK1-A
RK10-A
*The European Standard EN 1621-1:2012 includes two performance levels, Level 1
and Level 2; the latter o ering a higher level of protection. The RK-1 PLASMA KNEE
*The European Standard EN 1621-1:2012 includes two performance levels, Level 1 and
BRACE attained transmitted force values in accordance with EN 1621-1:2012 during
Level 2; the latter offering a higher level of protection. The Supertech RK-10 PLASMA
testing and was awarded Level 1 certification.
KNEE BRACE attained transmitted force values in accordance with EN 1621-1:2012 during
testing and was awarded Level 1 certification.
LIMITATIONS OF USE
LIMITATIONS OF USE
The Supertech RK-10 Plasma Knee Brace is for use ONLY while motorcycling and
The RK-1 Plasma Knee Brace is for use ONLY while motorcycling and it is not for use
it is not for use in other sporting or non-sporting activities.The Supertech RK-10
in other sporting or non-sporting activities.The RK-1 Plasma Knee Brace will ONLY
Plasma Knee Brace will ONLY provide limited protection against impacts in the
event of an accident or fall and users should be aware that the Supertech RK-10
provide limited protection against impacts in the event of an accident or fall and
Plasma Knee Brace will not provide complete protection against injury and no
users should be aware that the RK-1 Plasma Knee Brace will not provide complete
guarantees, warranties (express or implied) are made regarding the Supertech RK-
protection against injury and no guarantees, warranties (express or implied) are
10 Plasma Knee Brace's ability to avoid risk of injury. Users must also be aware that
made regarding the RK-1 Plasma Knee Brace's ability to avoid risk of injury. Users
different environment conditions (such as high or low temperatures) may reduce the
must also be aware that di erent environment conditions (such as high or low
performance of the Supertech RK-10 Plasma Knee Brace.
WARNING! USERS SHOULD BE AWARE THAT NO PRODUCT (INCLUDING PROTEC-
WARNING! USERS SHOULD BE AWARE THAT NO PRODUCT (INCLUDING PROTECTOR/S)
WILL PROVIDE COMPLETE PROTECTION AGAINST INJURY AND NO GUARANTEES,
TOR/S) WILL PROVIDE COMPLETE PROTECTION AGAINST INJURY AND NO GUAR-
WARRANTIES (EXPRESS OR IMPLIED) ARE MADE REGARDING THE PRODUCT'S
ANTEES, WARRANTIES (EXPRESS OR IMPLIED) ARE MADE REGARDING THE
(INCLUDING PROTECTOR/S) ABILITY TO AVOID RISK OF INJURY.
PRODUCT'S (INCLUDING PROTECTOR/S) ABILITY TO AVOID RISK OF INJURY.
SIZING
KNEE CUP WIDTH MEASUREMENTS
in cm
SIZING
9.9 cm - 10.7 cm
KNEE CUP WIDTH MEASUREMENTS
10.7 cm - 11.5 cm
in cm
11.5 cm - 12.2 cm
9.9 cm - 11.5 cm
11.5 cm - 12.9 cm
12.2 cm - 12.9 cm
You need to measure the maximum width of your knee, the diameter,
You need to measure the maximum width of your knee, the diameter,
not circumference. This should only be used as an indication and we
not circumference. This should only be used as an indication and we
strongly recommend you try on a knee brace to ensure you purchase
strongly recommend you try on a knee brace to ensure you purchase
the correct size.
2 EN
IMPORTANT USER INFORMATION: EN 1621-1:2012
CE Marking
UKCA Marking
CE Marking
Manufacturer
UKCA Marking
Manufacturer
Reference Standard
Protector CE Code:
Reference Standard
RK-1 PLASMA KNEE BRACE
Protector CE Code:
Read these instructions
SUPERTECH RK-10 PLASMA
before use
KNEE BRACE
Read these instructions
before use
in inches
3 7/8" - 4 1/4"
4 1/4" - 4 1/2"
in inches
4 1/2" - 4 3/4"
4 3/4" - 5 1/8"
Indicates the
product is intended
for Motorcycle use
Indicates the
product is intended
Indicates that this
for Motorcycle use
product is a knee
protector Type A
Indicates that this
K TYPE A
product is a knee
protector Type A
1
* Indicates the level of protection,
which
on this product is LEVEL 1
* Indicates the level of protection,
which on this product is LEVEL 1
KNEE BRACE
SIZE
S
KNEE BRACE
M
SIZE
L
S/M
XL
L/XL
WIDTH