Stihl RT 5097.1 Gebrauchsanleitung Seite 58

English
► Select the highest cutting height,
► Detach the grass catcher box,
► Detach the discharge chute,
Pushing the mowing deck under the mower
► Position the V-belt so that it fits into the V-belt
cover.
► Push the mowing deck (1) under the ride-on
mower from the left or right side.
► Select the lowest cutting height.
Attaching the mowing deck at the front
► Pull the left mowing deck mounting (1) down
and hold it there.
► Lift the mowing deck with one hand and fit the
mounting pin into the hole on the front mowing
deck mounting.
► Push the cotter pin (2) through the hole in the
mounting pin.
The left mowing deck mounting is attached to
the mowing deck.
► Repeat this procedure on the right mowing
deck mounting.
► Press the retaining plate (1) forward and hold
it.
58
11.6. ► Pull the V-belt (2) to the front and lift it
6.2.2.
► Attach the V-belt (2) to the V-belt pulley in
6.1.2.
Attaching the mowing deck at the rear
► Lift the mowing deck with one hand and hold
► Align the mowing deck until the bores in the
► Push the retaining pins (1) on the one side
► Insert the cotter pin (3) into the retaining pin
The cotter pin snaps into place.
► Thread the retaining pins (1) on the other side
► Insert the cotter pin (3) into the retaining pin
The cotter pin snaps into place.
Tensioning the V-belt
► Pull the tension spring (1) forward and attach
► Attach the tension spring (1) to the retaining
Attaching the V-belt cover
6 Assembling the ride-on mower
together with the V-belt cover.
such a way that it cannot twist.
The V-belt is attached.
it.
mounting are in line with the retaining pins on
the mowing deck.
through the bores in the mounting (2).
bores from above.
through the bores in the mounting (2).
bores from above.
it.
latch (2).
0478-192-9615-A