Units In Modular Configuration - Bosch CS 3000 AWP Installations- Und Bedienungsanleitung

Fig. 105
USER menu - SNOW-BLOWING switch
• If enabled, the function activates the fans in order to avoid the
accumulation of snow
• The fans start for 2 minutes every 30 minutes. With T air < 3ºC and
unit stopped
• Press or to select YES or NO
Fig. 106

Units in modular configuration

• Select SELECT ADDRESS, DHW SWITC, DHW FIRST by
select address, DHW SWITCH and DHW FIRST by
ENTER to confirm, only when DHW SWITCH
• When 'YES' is selected, the following settings can be made
• When DHW SWITCH is selected as 'YES', then the serial number of the
address is white on a black background, otherwise it is black on a
white background
• The default setting of DHW SWITCH is 'NO', and the default setting of
DHW FIRST is 'NO'
• When there is no hot water function (can be set in the service menu),
this content is not displayed
CS3000 AWP – 6721852570 (2022/11)
Fig. 107
or ,
or , press
Control unit
67