Explanation Of Symbols And Safety Instructions; General Safety Instructions - Bosch CS 3000 AWP Installations- Und Bedienungsanleitung

1

Explanation of symbols and safety instructions

1.1 Explanation of symbols
Warnings
In warnings, signal words at the beginning of a warning are used to
indicate the type and seriousness of the ensuing risk if measures for
minimizing danger are not taken.
The following signal words are defined and can be used in this document:
DANGER
DANGER indicates that severe or life-threatening personal injury will
occur.
WARNING
WARNING indicates that severe to life-threatening personal injury may
occur.
CAUTION
CAUTION indicates that minor to medium personal injury may occur.
NOTICE
NOTICE indicates that material damage may occur.
Important information
The info symbol indicates important information where there is no risk to
people or property.
1.2

General safety instructions

HGeneral safety instructions
This manual provides the correct procedures for installation, use and
maintenance of the unit.It is mandatory to read the manual carefully so it
will save time during operations and avoid causing damages to things
and injuring people.
CAUTION
Pay particular attention to warnings, prohibitions and danger signs that
indicate important operations or information; operations that cannot be
done, that compromise the functionality of the unit or which may cause
damage to things or persons.
HSafety
• The units have been designed and created to prevent injuries to
people.
• To carry out the operations use protection equipment: gloves,
goggles, helmet, headphones, protective pads.
• All operations must be carried out by professional and authorized
contractors, trained on possible risks of general nature, electrical
and deriving from operating with equipment under pressure.
• Only professional and authorized contractors can operate on the
unit, as required by the current regulations.
CS3000 AWP – 6721852570 (2022/11)
Explanation of symbols and safety instructions
Fig. 61
HWarning/ risk situations
• The units have been designed and created to prevent injuries to
people.
• During designing it is not possible to plan and operate on all risky
situations.
• Installation, starting, maintenance and repair requires specific
knowledge; if these processes are carried out by inexperienced
personnel, they may cause damages to things and injuries to people.
• The manufacturer accepts no responsibility if the equipment is used
for any purpose other than the intended use.
• Use the unit only:
– to cool or heat water or a glycol water mix for heating and air-
conditioning.
– to keep the limits foreseen in the technical schedule and in this
manual.
HOutdoor installation
• In compliance with the recent local regulations, the positioning,
hydraulic system, refrigerating, electrics and the ducting of the air
must be determined by the system designer.
• Follow the local safety regulations.
• Verify if the electrical line characteristics are in compliance with data
quotes on the type plate of the unit.
HMaintenance
• Plan periodic inspection and maintenance to avoid or reduce
repairing costs.
• Turn the unit off before any operation.
HModification
• All unit modifications will end the warranty coverage and the
manufacturer responsibility.
HBreakdown/malfunction
• In case of breakdown or malfunction, disable the unit immediately
and contact a certified service agent.
• Use original spare parts only.
• Using the unit in case of breakdown or malfunction:
– voids the warranty;
– it may compromise the safety of the unit;
– it may increase time and repair costs.
0010045008-001
47