Stryker ENT Bedienungsanleitung Seite 7

Symbol Name: Definition
Stacking limit by mass: To indicate that the items shall not be vertically
stacked beyond the specified number, either because of the nature of the
0630 transport packaging or because of the nature of the items themselves.
Stacking limit by number: To indicate that the items shall not be verti-
cally stacked beyond the specified number, either because of the nature of
the transport packaging or because of the nature of
2403 the items themselves.
Stand-by: To identify the switch position by means of which part of the
equipment is switched on in order to bring it into the stand-by condition,
5009 and to identify the control to shift to or to indicate the state of low power
consumption. Each of different states of power consumption may be indict-
ed using a corresponding colour.
Fuse: To identify fuse boxes or their location.
5016
Earth; ground: To identify an earth (ground) terminal in cases where nei-
ther the symbol 5018 nor 5010 is explicitly required.
5017
Protective earth; protective ground: To identify any terminal that is
intended for connection to an external conductor for protection against elec-
tric shock in case of a fault, or the terminal of a protective earth (ground)
5019 electrode.
Equipotentiality: To identify the terminals that, when connected together,
bring the various parts of an equipment or of a system to the same potential,
5021 not necessarily being the earth (ground) potential, e.g. for local bonding.
Alternating current: To indicate on the rating plate that the equipment is
5032 suitable for alternating current only; to identify relevant terminals.
Electrostatic sensitive devices: To indicate packages containing electro-
static sensitive devices, or to identify a device or a connector that has not
5134 been tested for immunity to electrostatic discharge.
Non-ionizing electromagnetic radiation: To indicate generally elevated,
potentially hazardous, levels of non-ionizing radiation, or to indicate equip-
5140 ment or systems e.g. in the medical electrical area that include RF transmit-
ters or that intentionally apply RF electromagnetic energy for diagnosis or
treatment.
Type BF applied part: To identify a type BF applied part complying with
IEC 60601-1.
5333
Product-Specific Symbols
Symbol Name: Definition
Quantity: Indicates the number of medical devices in the
QTY
packaging.
Note symbol: it is used to supplement or clarify information.
GTIN Global Trade Item Number
81 FR 38911 FDA Final rule for the use of symbols in labeling
Symbol Name: Definition
Rx Only Caution: Federal law (USA) restricts this device to sale by
or on the order of a physician.
EN How to Use this Document | 3/21