Honda CRF450R Fahrerhandbuch Und Wettbewerbsanleitung Seite 84

4. Make sure the piston is at TDC on the
compression stroke (page 72).
Loosen the camshaft holder bolts (6) in a
crisscross pattern in two or three steps.
Remove the camshaft holder bolts, set rings (7)
and camshaft holder (8).
As you remove the camshaft holder, set rings may
be sticking in the camshaft holder.
(7)
(6)
(6) camshaft holder bolts
(7) set rings
(8) camshaft holder
NOTICE
Do not let the set rings fall into the crankcase.
If the set rings are remained on the camshaft
holder, remove the set rings carefully.
5. Slide the left camshaft bearing (9) and remove
the camshaft (10) and cam chain (11).
(11)
(9) left camshaft bearing
(10) camshaft
(11) cam chain
(8)
6. Remove the intake valve lifters (12).
Keep the intake valve lifters and shims separate so
you can easily identify the originally installed
location such as intake or exhaust, right or left.
(12) intake valve lifters
(10)
(9)
(12)
Valve Clearance
7. Remove the valve shims (13).
(13)
(13) valve shims
Servicing Your Honda
(13)
75